TV Infobar Topic is solved

[Ted377]

Since the only way to bring it up is to hit “select”(Siri pad) , there is no other way to bring up VideoOSD without changing the key mapping...

Okay, I see we just talk completely past each other.
I will make you a video tomorrow and show you what is meant.

[amet]

see, there is only one button to bring the Info bar and VideoOSD(control bar) up.. that would be the select button.

option 1:
only bring new info bar on channel switch, the select will bring up VideoOSD

option 2:
dont hide Info bar so that you can keep switching channels , manually close it and show VideoOSD

I'll wait for the video, but I know exactly what you mean

[Montoya]

@Amet, I think Ted377 means this, which is also my preference
(Below a rewrite from what was previously written in topic and adapted for current TF)

During Live TV with no OSD on screen:

Scenario A (=Bottom Info Bar ONLY and automatic exit):
A1. Center click >> Open Bottom Info Bar
A2. No input from remote >> OSD timer closes Bottom Info Bar and screen goes back to Live TV with no OSD on screen

Scenario B (=Bottom Info Bar >> PVR controls >> no remote input >> automatic exit):
B1. Center/select click >> Open Bottom Info Bar
B2. Menu click before OSD timer times out >> Close Bottom Info Bar AND open PVR controls button bar
B3. No input from remote >> OSD timer closes PVR controls button bar and screen goes back to Live TV with no OSD on screen

Scenario C (=Bottom Info Bar >> PVR controls >> PVR controls navigation >> automatic exit):
C1. Center/select click >> Open Bottom Info Bar
C2. Menu click before OSD timer times out >> Close Bottom Info Bar AND open PVR controls button bar
C3. input from remote >> PVR controls navigation with Left/Right etc
C4. No input from remote anymore >> OSD timer closes PVR controls button bar and screen goes back to Live TV with no OSD on screen

Scenario D (=Bottom Info Bar >> PVR controls >> PVR controls navigation >> manual exit):
D1. Center/select click >> Open Bottom Info Bar
D2. Menu click before OSD timer times out >> Close Bottom Info Bar AND open PVR controls button bar
D3. Input from remote >> PVR controls navigation with Left/Right
D4. Menu click >> Manual exit that closes PVR controls button bar and screen goes back to Live TV with no OSD on screen

Scenario E (=Bottom Info Bar >> PVR controls >> Top Info Bar and manual exit):
E1. Center/select click >> Open Bottom Info Bar
E2. Menu click before OSD timer times out >> Close Bottom Info Bar AND open PVR controls button bar
E3. Up on remote >> Open Top Info Bar
E4. Navigation in Top Info Bar
E5. First menu click >> Go back to PVR Control Bar
E6. Second menu click >> Manual exit that closes PVR controls button bar and screen goes back to Live TV with no OSD on screen

Remote Controls that are active, during a Scenario step:

Active remote buttons when bottom Info Bar is on screen (during scenario step A1+B1+C1+D1+E1):
UP: Channel up
Down: Channel down
Left: Skip BW (and make multiple skips steps available when needed)
Right: Skip FW (and make multiple skips steps available when needed)
Menu : Close OSD and go back to Live TV

Active remote buttons when PVR controls button bar is in focus and active (during scenario step B2+C2+C2+D2+E2) :
UP: Open Top Info Bar
Down: Open Top Info Bar
Left: PVR Control buttons navigation
Right: PVR Control buttons navigation
Menu: Close OSD and go back to Live TV

Active remote buttons when Top Info Bar is in focus and active (during scenario step E4 ) :
UP: Open & Close Top Info Bar
Down: Navigate in Top Info Bar
Left: Top Info Bar navigation
Right: Top Info Bar navigation
Menu once: Go back to PVR control bar
Menu twice: Close OSD and go back to Live TV

@Ted377, please provide feedback on above

[Ted377]

@Amet, I think Ted377 means this, which is also my preference
(Below a rewrite from what was previously written in topic and adapted for current TF)

During Live TV with no OSD on screen:

Scenario A (=Bottom Info Bar ONLY and automatic exit):
A1. Center click >> Open Bottom Info Bar
A2. No input from remote >> OSD timer closes Bottom Info Bar and screen goes back to Live TV with no OSD on screen

Scenario B (=Bottom Info Bar >> PVR controls >> no remote input >> automatic exit):
B1. Center/select click >> Open Bottom Info Bar
B2. Menu click before OSD timer times out >> Close Bottom Info Bar AND open PVR controls button bar
B3. No input from remote >> OSD timer closes PVR controls button bar and screen goes back to Live TV with no OSD on screen

Scenario C (=Bottom Info Bar >> PVR controls >> PVR controls navigation >> automatic exit):
C1. Center/select click >> Open Bottom Info Bar
C2. Menu click before OSD timer times out >> Close Bottom Info Bar AND open PVR controls button bar
C3. input from remote >> PVR controls navigation with Left/Right etc
C4. No input from remote anymore >> OSD timer closes PVR controls button bar and screen goes back to Live TV with no OSD on screen

Scenario D (=Bottom Info Bar >> PVR controls >> PVR controls navigation >> manual exit):
D1. Center/select click >> Open Bottom Info Bar
D2. Menu click before OSD timer times out >> Close Bottom Info Bar AND open PVR controls button bar
D3. Input from remote >> PVR controls navigation with Left/Right
D4. Menu click >> Manual exit that closes PVR controls button bar and screen goes back to Live TV with no OSD on screen

Scenario E (=Bottom Info Bar >> PVR controls >> Top Info Bar and manual exit):
E1. Center/select click >> Open Bottom Info Bar
E2. Menu click before OSD timer times out >> Close Bottom Info Bar AND open PVR controls button bar
E3. Up on remote >> Open Top Info Bar
E4. Navigation in Top Info Bar
E5. First menu click >> Go back to PVR Control Bar
E6. Second menu click >> Manual exit that closes PVR controls button bar and screen goes back to Live TV with no OSD on screen

Remote Controls that are active, during a Scenario step:

Active remote buttons when bottom Info Bar is on screen (during scenario step A1+B1+C1+D1+E1):
UP: Channel up
Down: Channel down
Left: Skip BW (and make multiple skips steps available when needed)
Right: Skip FW (and make multiple skips steps available when needed)
Menu : Close OSD and go back to Live TV

Active remote buttons when PVR controls button bar is in focus and active (during scenario step B2+C2+C2+D2+E2) :
UP: Open Top Info Bar
Down: Open Top Info Bar
Left: PVR Control buttons navigation
Right: PVR Control buttons navigation
Menu: Close OSD and go back to Live TV

Active remote buttons when Top Info Bar is in focus and active (during scenario step E4 ) :
UP: Open & Close Top Info Bar
Down: Navigate in Top Info Bar
Left: Top Info Bar navigation
Right: Top Info Bar navigation
Menu once: Go back to PVR control bar
Menu twice: Close OSD and go back to Live TV

@Ted377, please provide feedback on above

@amet, video is out and I apologize for my bad english

@Montoya, that's exactly what I'm trying to explain all the time

Scenario C (=Bottom Info Bar >> PVR controls >> PVR controls navigation >> automatic exit):[/u]
C1. Center/select click >> Open Bottom Info Bar / No input from remote anymore >> OSD timer closes Info Bar and screen goes back to Live TV with no OSD on screen
C2. Menu click before OSD timer times out >> Close Bottom Info Bar AND open PVR controls button bar
C3a. input from remote >> PVR controls navigation with Left/Right etc
C3b. input from remote >> PVR controls - description with swipe down/up
C4. No input from remote anymore >> OSD timer closes PVR controls button bar and screen goes back to Live TV with no OSD on screen

[amet]

ok, should be done... only thing that was missing was B2, C2,D2 and E2? that is if A2 was not true

[Montoya]

ok, should be done... only thing that was missing was B2, C2,D2 and E2? that is if A2 was not true

Yes, going to PVR controles button bar, should be a manual action and when only Bottom Info Bar is requested, it should auto close with an OSD timer and go back to Live TV.

[Ted377]

ok, should be done... only thing that was missing was B2, C2,D2 and E2? that is if A2 was not true

Yes, going to PVR controles button bar, should be a manual action and when only Bottom Info Bar is requested, it should auto close with an OSD timer and go back to Live TV.

Yes! Please

[Ted377]

Thanks for the implementation @amet.
So it is exactly right

[amet]

Thanks for the implementation @amet.
So it is exactly right

Didn’t take us long

[Montoya]

So it is exactly right

Almost there, because can you skip BW/FW, executed after Bottom Info Bar is up ?